Test Print Mode (Test Mode) - Toshiba e-STUDIO350 Service Handbook

2.2.4 Test print mode (test mode 04)
The embedded test pattern can be printed out by keying in the following codes in the test print mode (04).
<Operation procedure>
[0][4]
(Code)
[POWER]
Notes:
1. When an error occurs, it is indicated on the panel, but the recovery operation is not per-
formed. Turn OFF the power and then back ON to clear the error.
2. During test printing, the [CLEAR] button is disabled when "Wait adding toner" is displayed.
Code Types of test pattern
111 Primary scanning direction 33 gradation steps
113 Secondary scanning direction 33 gradation steps Error diffusion
142 Grid pattern
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[START]
Operation
Continuous
Test Printing
2 - 45
05/12
[CLEAR] [POWER] OFF/ON
(Exit)
Remarks
Error diffusion
Pattern width: 2 dots, Pitch: 10 mm
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2