Step 9: Configure System; Substep A: Activate Utam - Toshiba Strata AirLink Installation Manual

BSIA System Installation

Step 9: Configure System

Step 9: Configure System
1. Make sure the PC is
connected to a BSIA.
2. Turn on the PC.
3. Double-click the Strata
AirLink Manager Desktop
icon.
4. Type the name, organization
(company name) and the
password.
5. Click Continue.
6. Enter the same password and
click OK.
7. Click Continue.
8. Enter the password and click
OK.

Substep A: Activate UTAM

1. From the Desktop
26
Toolbar, click the
Status icon.
Windows automatically starts.
This displays only once when the system is initialized.
If the password is forgotten, the software must
Important!
be reloaded. The password can be changed
after initialization of the system.
The Password Verification dialog box appears.
The Setup dialog box displays again.
The software starts and requests your password.
Important! If a warning message that the manager
cannot open port 1 or 2 is received, check the
software port configuration against the
hardware configuration.
3327
3289
Strata AirLink Installation Guide
3484
5/00