Error States; Tools Menu - Motorola 7545MBW User Manual

Omnii hand-held computer
Table of Contents

Advertisement

G - 6 Omnii Hand-Held with Windows CE 6.0 User Manual
If the modem loses the connection to the GSM network, the following states are repeated: Searching for
network, Registered on network, Searching for packet data, and Ready to connect.

Error States

The following temporary error states (i.e., these states may disappear without interaction) may be displayed:
Emergency calls only.
The modem has found a network but is not allowed to register (e.g. no roaming agreement between net-
works). The modem keeps searching for another network.
No network found.
A network is not currently available. The modem continues searching for a network.
Packet data not available.
The current network does not support a packet data service.
Packet data not allowed.
The modem is not allowed to use the packet data service on the current network (e.g. no GPRS roaming
agreement between network; a roaming agreement for voice may still be in place). It is also possible that
you do not have a subscription for GPRS at all.
The remaining error states are permanent:
SIM is missing.
The SIM card is missing. After the SIM has been inserted a warm boot may be required.
SIM failure.
The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too many times). A
new SIM is needed.
Modem failure.
The modem did not respond to commands as expected. If a warm boot does not clear this condition, the
modem may need to be replaced.
NDIS error.
An internal software error has occurred. If a warm boot does not clear this condition, Motorola technical
support may need to investigate further.

Tools Menu

The Tools menu in the main Wireless WAN dialog box offers some additional, advanced setup features.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7545mbwmGm37545mbwp7545mbwpGm37545mbwGm37545mbwm

Table of Contents