Servers - Motorola 7545MBW User Manual

3 - 16 Omnii Hand-Held with Windows CE 6.0 User Manual
Scanner is used to create a connection to a barcode scanner. A serial connection is created, then the
Scanner Services is notified of the connection so that the incoming barcode scan will be forwarded directly to
Scanner Services.
Printer Port must be chosen here if you want to communicate with a paired Bluetooth printer. For further
details, see "Mode" on page
• Once you've completed the information, tap on Next and then in the Services screen, click on Done.

Servers

When a remote Bluetooth device initiates a Bluetooth connection to the Omnii, the remote device is considered
the Bluetooth master and the hand-held, the Bluetooth slave. In order for the remote device to connect to the
hand-held, the Omnii must offer a service in the form of a server. The Servers tab allows these services to be
enabled and configured. There are three server services available: Serial, Scanner and OBEX OPP.
Serial server enables the Serial Port Profile server; a Serial Port can be selected from the drop-down menu.
You can assign either a BSP or a COM prefix from the drop-down menu. BSP (Bluetooth Serial Port) was
created by Microsoft to allow Bluetooth to have its own serial prefix in order to free up virtual COM prefixes as
these are limited and are widely used.
NOTE
Even after a Serial Port Profile server is created, an application must open the
created port before a remote device can connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service (SCS). This is
used for Bluetooth barcode scanners that operate in client mode. SCS opens the server port and handles the
scanner input.
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed on the Omnii after
a change is made to this option. The OPP Server allows other Bluetooth devices to send files to this device.
• Tap on the check box to activate the server.
3-17.