Table of Contents
Advertisement
Indicator Lamps and Recorder Status
Lamp Indication on the Memory Card Recorder or the Remote Control Panel
This table shows the relationship between lamp Lit/Unlit/blinking states and the recorder's operating status.
: Lit
: Normal blinking
: Blinking consisting of short off intervals combined with long on intervals
: Blinking consisting of short on intervals combined with long off intervals
Indicator Lamp
REC
READY
BUSY
(Red)
(Green)
(Red)
,
or
*
1 The [REC] lamp normally blinks under the following
conditions:
• When there is little space left (about 0 minutes or less)
on an SDHC Memory Card
• When the number of files recorded on each SDHC
Memory Card inserted in slots 1, , , and 4 totals over
5,000 files
*
For details on how to run the Front-End or Back-End
application, refer to the operating instructions supplied
with the Front-End or Back-End application.
*
If the error is related to the status of the SDHC Memory
Card, the status will appear in the status display of the
Overlay OSD. Refer to "Viewing Live Video → Viewing
the status of the recorder" on page 55, or contact your
supplier.
: Unlit
: Fast blinking (about three times/sec)
Status immediately after power-on
Recorder booting, Front-End and Back-End applications running
Live video display
*
Normal recording
, Loop recording
1
Intermittent recording
*
1
• Post-recording
• Including Front-End and Back-End application operation
Restoring automatically
Administrator setting screen display with recording stopped
(accessing SDHC Memory Card), formatting, deleting a file
Administrator setting screen display with recording stopped
(not accessing SDHC Memory Card)
Playing, exporting, uploading
• Terminating operation
• SDHC Memory Card start processing (recognition when inserted)
• SDHC Memory Card shutdown processing (when a SDHC Memory Card slot
cover is opened)
The SDHC Memory Card slot cover is opened.
Updating recorder firmware
• Updating microprocessors on the recorder and Remote Control Panel
• Copying menu settings
Successfully copied the menu settings
Failed to copy menu settings
An error involving recording operations occurred during live screen display
Starting upgrading
Finishing upgrading
Failed in upgrading
• No SDHC Memory Card is inserted, or it is not recognized
• No more SDHC Memory Card space available
• The write-protect switch of the SDHC Memory Card is set to "LOCK"
• An unformatted card
(continued)
Recorder Status
Notes:
• If pressing the [REC] button or entering a recording
trigger fails to start recording, the [REC] lamp blinks at a
high rate.
• The [BUSY] lamp blinks when accessing the SDHC
Memory Card immediately after opening or closing the
recorder's SDHC Memory Card slot cover.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
108
*
*
Hide quick links:
Advertisement
Table of Contents
