Panasonic AG-CPD20P Operating Instructions Manual page 115

Memory card video recorder
Hide thumbs Also See for AG-CPD20P:
Table of Contents

Advertisement

Error Message
(continued)
No.
E46
Menu copy failed.
E47
Source information file cannot be
loaded.
E48
Shift information file cannot be
loaded.
E49
Area information file cannot be
loaded.
E4
Service log copy failed.
E448
Operation was canceled to start
streaming.
E5410
GPS communication error.
Please check the GPS module.
E701
Storage capacity was not enough to
transfer the file.
E70
File transfer was completed.
Restore file remained.
E70
File not found in SDHC cards.
E7401
Write Protect cards found.
Couldn't start file transfer.
E740
Media error.
File transfer was incomplete.
E7405
Storage write error.
File transfer was incomplete.
E7407
No SDHC Cards found.
Couldn't start file transfer.
E740
Couldn't start file transfer.
E741
File transfer was incomplete.
E7499
System error.
File transfer was incomplete.
E801
USB storage capacity was not
enough to export.
E80
Export was completed.
Restore file remained.
E80
File not found in SDHC cards.
E8400
No USB storage devices found.
Couldn't start export.
E8401
Write Protect cards found.
Couldn't start export.
E840
All USB storages are read only.
Couldn't start export.
E840
Media error.
Export was incomplete.
E8404
USB storage file system error.
Couldn't start export.
E8405
USB storage write error.
Export was incomplete.
E8406
Found update file in USB storage.
Couldn't start export.
E8407
No SDHC Cards found.
Couldn't start export.
E8409
Couldn't start export.
E8499
System error.
Export was incomplete.
E8880
USB storage was ejected.
Export was incomplete.
Message
For copying to a USB memory device, connect a write-enabled USB
memory device. For copying to a recorder, connect a USB memory device
that contains data.
There is no source file or the content of the file is incorrect.
There is no shift file or the content of the file is incorrect.
There is no area file or the content of the file is incorrect.
Copying service log is failed. Connect a writable USB memory device and
try copying again.
Streaming starts, and the operation is canceled. Wait until streaming ends.
An error occurred in the GPS module.
Consult your supplier.
Capacity of the server is not enough for uploading data, and uploading is
canceled.
Upload was completed, but video files not restored remain on the SDHC
Memory card.
No file for uploading is found on an SDHC Memory card.
A read-only SDHC Memory Card is found, and uploading cannot be started.
A read/write error was detected with the media. Replace the SDHC Memory
Card with another one.
A verification error has occurred in the server storage, and uploading cannot
be completed.
No SDHC Memory card is inserted, and uploading cannot be started.
Upload cannot be started. Check the network connection.
Upload cannot be completed because of network trouble.
A system error has occurred, and uploading cannot be completed.
Use other USB memory device that is not full.
Restore the file not yet restored, and export it again.
There are no files to export. No export operation needed.
Connect a USB memory device.
Set the SDHC Memory Card write-protect switch away from the write-
protect position.
Connect a write-enabled USB memory device.
Replace the SDHC Memory Card or the USB memory device.
Replace the USB memory device.
Delete the update file on the USB memory device.
Insert an SDHC Memory Card with recorded files.
Replace the SDHC Memory Card with another one.
Reboot the recorder.
Do not remove the USB memory device while exporting data. Reconnect the
USB memory device and export again.
Measure
115

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents