Setup; Items Officers Can Set - Panasonic AG-CPD20P Operating Instructions Manual

Setup

Factory default values are shown below.

Items officers can set

Setting Item
1 Camera1
AE[– -- +]
LPR Mode
Patrol Shutter Speed
Patrol Zoom
LPR Shutter Speed
LPR Zoom
 Audio/Video
Image Enhance
VIDEO OUT1
 Setup/Info
Officer
Officer 1 ID
Officer 1 Name
Officer 2 ID
Officer 2 Name
*
Source

*
Area

*
Shift

Work Time
Overlay OSD
Camera1 Rec LED
Target Speed
*
1 CAM1 and CAM may not be displayed, depending on
the settings made on the Video Allocation screen in
Administrator setup.
*
 If the Front-End application is connected, the names,
Source, Area, and Shift, may be different from the
corresponding field names of the Front-End application.
The field name of the Front-End application can be
changed using the Back-End application.
*
 This may not be selected, depending on the setting made
on the Trigger screen in Administrator setup.
Factory Default Value
Color camera connected the [CAMERA 1] connector setting
0 Color camera video brightness setting totally
PATROL LPR mode setting
AUTO Shutter speed setting with [LPR Mode] set to "PATROL"
×1.0 Zoom ratio setting with [LPR Mode] set to "PATROL"
1/1000 Shutter speed setting with [LPR Mode] set to "LPR"
×1.0 Zoom ratio setting with [LPR Mode] set to "LPR"
Audio and video setting
OFF The brightness of a dark video image on the main screen adjustment
VIDEO OUT Output to [VIDEO OUT1] connector
Setup/Information
Officer settings
---- Officer 1 ID
---- Officer 1 name
---- Officer 2 ID
---- Officer 2 name
---- Source
---- Area
---- Shift
---- Work Time
OFF Overlay OSD setting
ON Color camera [REC] lamp setting
OFF Target vehicle speed setting
Setting : -, -1, 0, +1, +
Setting : PATROL (normal mode), LPR (License Plate Recognition
mode)
Setting : AUTO, 1/100, 1/500, 1/1000
Setting : ×1.0 - ×.0
Setting : AUTO, 1/500, 1/1000
Setting : ×1.0 - ×.0
Setting: OFF (no enhancing)
LOW (enhancing slightly)
HIGH (enhancing strongly)
Setting: CAM1 (Camera 1)
CAM (Camera )
VIDEO OUT (the same signal as that output from the
[VIDEO OUT] connector)
Setting : OFF, AUTO, SIMPLE, DETAILS,
Setting : ON, OFF
Setting: OFF, 1, , ..., 00
19
Description
*
1
*
1
*