Management Mode - Panasonic AG-CPD20P Operating Instructions Manual

Administrator Setup

Management Mode

Classify
Use this function to set whether the classify tag is added
upon stopping of recording.
DISABLE : Disables adding a classify tag.
ENABLE : Enables adding a classify tag.
FORCE : Add a classify tag forcibly.
If "Loop Rec" on the Rec/Play screen is set to ON, the
classify tag will not be added even if [ENABLE] or [FORCE]
is selected.
Setting Method
Use one of the following methods to enter officer data.
AUTO : Automatically reads and loads officer data
for up to two persons from a USB memory
device.
MANUAL : Display the menu on the LCD panel, and
then read in and configure officer data from
a USB memory device on the Officer setup
top screen.
LIST : Display the menu on the LCD panel and
allow you to set the officer data by selecting
from the list on the Officer setup top screen
after reading in the officer data already
stored on this unit.
Upload Mode
Use this function to set the upload mode.
AUTO : Data are uploaded automatically.
MANUAL : Data are uploaded manually.
Notes:
• If Loop Rec on the Rec/Play screen is set to ON, the
Upload Mode cannot be set, and uploading is disabled.
• If the Upload Mode is set to AUTO, connection with a
PC will be automatically started and maintained during
uploading.
Export Menu
Use this function to set Export menu.
ENABLE : Enables Export menu.
DISABLE : Disables Export menu.
Preset Select
Use this function to set preset selection.
ENABLE : Enables the preset selection.
DISABLE : Disables the preset selection.
(continued)
Operation Key Lock
Use this function to lock the buttons on the remote control
panel.
OFF : All buttons can be used.
ANY : The [W], [T], [AUTO ZOOM], [BACKLIGHT],
[CAMERA SELECT], [IR MODE],
[AUDIO2MUTE], [LIVE/ARCHIVE], [PREV],
[NEXT], and [BOOKMARK] buttons are locked.
STOP : The buttons other than the [STOP] button are
locked.
Notes:
• When a USB memory device containing administrator
data is connected, you can press the [MENU] button to
enter the Setup/Admin top screen via the menu items. Set
[Management Mode] – [Operation Key Lock] setting to
"OFF" in administrator setup to release key lock.
• The key lock is activated for the first time when you move
to the live screen.
• The [LOCK] lamp indicates whether the keys are locked.
• The Color Camera zoom and brightness buttons cannot
be locked.
• Trigger signal (GPI1-16) control (see page 86) is not
locked.
89