Table of Contents
Advertisement
Status Display
The Status Display shows messages about the operating status of the SDHC Memory Card and the recorder. Take action as
appropriate for each status.
Status Display
CARD FULL
CARD PROTECT
VUP CARD
UNFORMATTED
NO CARD
READ ERROR
UNSUPPORTED
PLAY ERROR
The following conditions may have occurred.
• There is no space left on the SDHC Memory Card.
• Files contained in one of the SDHC Memory Cards inserted in the SDHC Memory Card slots 1, ,
3, and 4 exceed 5,000 files.
Replace the SDHC Memory Card with an SDHC Memory Card with free capacity, or free up
space in the SDHC Memory Card for new data.
The write-protect switch of the SDHC Memory Card is set to "LOCK". Move the switch to enable
writing.
Writing is not possible on an SDHC Memory Card intended for version upgrade. Replace the card
with one that is not intended for version upgrade.
The SDHC Memory Card is not formatted. Replace it with a formatted card.
No SDHC Memory Card is inserted. Insert an SDHC Memory Card.
An error occurred while reading. File playback is not possible, or the associated meta information
cannot be displayed correctly.
Archive screen: The file is unsupported. Playback is not available.
Live screen: The memory card is unsupported. For the memory card supported, refer to "Usable
memory cards" in Operating Instructions Section 1: Before Use.
A decoder malfunction occurred. Playback is not available. Reboot the recorder.
Measure
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
118
Hide quick links:
Advertisement
Table of Contents
