Panasonic AG-CPD20P Operating Instructions Manual page 93

Administrator Setup
Wireless LAN
Use this function to set details for the USB wireless LAN.
AP Priority
Use this function to set priority.
Random : Trying to connect to the access point at
random
AP1 Highest : Trying to connect to the access point in
order of Access Point1, Access Point2,
..., Access Point10
Network
Use this function to set the access point of the network.
Setting: Access Point1, Access Point2, ..., Access
Point10
Make the following settings for each access point.
• Access Point
Set whether the access point is enabled or disabled.
Setting: ENABLE, DISABLE
• Security
Use this function to set security.
Setting: WEP, WAP/WPA2-PSK, NONE
• Service Set ID (SSID)
Use this function to set the service set ID.
• Network Key
Use this function to set network key.
• Key Index
Use this function to set key index.
Setting: 1, 2, 3, 4
[Set] button
Press this button when a setting is changed. The network
setting will be updated.
(continued)
Reset All Network Settings
Use this function to reset the network settings.
,
1. Press the [
Network Settings].
Select
2. Press the [ ] button.
Select
,
3. Press the [
press the [ ] button to confirm the entry.
Select
Confirm
93
] buttons to select [Reset All
] buttons to select [OK] and