Embedded Osd - Panasonic AG-CPD20P Operating Instructions Manual

Administrator Setup

Embedded OSD

Main OSD
Use this function to set whether the items in "Contents" are
to be embedded on the main screen on recording.
ON: Trigger, Time, and Source@Area that are set to
ON are embedded on the screen during recording.
When a file with the items embedded is played,
the embedded items are displayed at the recorded
locations.
OFF: No item is embedded during recording.
Sub OSD
Use this function to set whether the items in "Contents" are
to be embedded on the sub screen during recording.
ON: Trigger, Time, and Source@Area, that are set to
ON are embedded on the screen during recording.
When a file with the items embedded is played,
the embedded items are displayed at the recorded
locations.
OFF: No item is embedded during recording.
Display Position
Use this function to set the display position for the On-
Screen Display on the screen and in record files.
L-Upper : Upper left
R-Upper : Upper right
L-Bottom : Lower left
R-Bottom : Lower right
Trigger
Use this function to turn trigger display on or off upon trigger
signal (GPI1–16) inputs.
Setting : ON, OFF
Note:
The Detailed Overlay OSD (see pages 56, 70) will hide this
indication.
Time
Use this function to turn date and time display on or off
during recording.
Setting : ON, OFF
Note:
The Detailed Overlay OSD (see pages 56, 70) will hide this
indication.
(continued)
Display for the vehicle identification and name
of a location (Source@Area)
Use this function to turn vehicle identification and name of a
location on or off during recording.
This information appears as "Source@Area".
The first 5 characters in the vehicle identification is displayed
as "Source" and the first 4 characters in the name of a
location is displayed as "Area".
Setting : ON, OFF
Notes:
• If the Source is less than 5 characters, the number of
characters for the Area is adjusted so that the total number
of characters becomes 10.
• If the Area is less than 4 characters, the number of
characters for the Source is adjusted so that the total
number of characters becomes 10.
• "@Area" is displayed when there is no Source.
• The vehicle identification only is displayed when there is
no Area.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
87