NEC Univerge SV8100 Installation Manual page 17

When you click import, the import tool will firstly check to see if you have entered information into
each of the areas. If you have not entered anything for example trunks you will get a warning
message telling you about it. Click yes if you are happy to continue.
The import also checks the information taken accross from the General page. If for example you
have not configured some of the items correcty in the SMDR setup you will be prompted. In this case
be sure to correct the items and upload them to the SV8100. Once they are uploaded, you will need
to copy and paste the information in the General page over again.
When the import is successful you receive the following message.
The system in now fully configured and operational based on the information imported by SV8100 PC
Pro.