Event Id - Epson EH-TW6600W User Manual

Troubleshooting

Event ID

Check the number, and try the remedy as follows. If the problem persists, contact your local dealer or the
nearest Epson repair center.
Epson Projector Contact List
s
Event ID
0432 The EasyMP Network Projection failed to be
0435 started.
0434 The network communication status is unstable. Check the network communication status, and
0481
0482
0485
0433 Transferred images cannot be played.
0484 Communication was disconnected from the
computer.
0483 The EasyMP Network Projection exited unex‐
04FE pectedly.
0479 A system error occurred in the projector.
04FF
0891 The access point with the same SSID cannot be
found.
0892 The authentic methods of WPA/WPA2 are in‐
consistent.
0894 Communication was disconnected because of
the connection with an unauthorized access
point.
0898 DHCP failed to be acquired.
0899 Other connection-related errors
Cause
101
Remedy
Restart the projector.
reconnect it after a while.
Restart the EasyMP Network Projection.
Check the network communication status, and
restart the projector.
Restart the projector.
Set the same SSID as that of the computer and
the access point to the projector.
Check that the wireless LAN security settings
are correct.
Check with your network administrator and fol‐
low his/her instructions.
Check that the DHCP server is operating cor‐
rectly. If not using DHCP, turn off the DHCP set‐
ting.
If the problem persists even after the projector
or the EasyMP Network Projection is restarted,
contact us at the following address.
Projector Contact List
Epson
s