Table of Contents
Advertisement
Configuration Menu
Info menu
Function
Projector Info
Version
Reset menu
Function
Reset All
Reset Memory
Reset Lamp Hours
Menu/Settings
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Deep Color
Video Signal
Status
Serial Number
Event ID
Main
Video
Video2
Resets all items in the Configuration menu to their default settings.
The following items are not reset to their defaults: Panel Alignment, Lamp
Hours, Language, Network, Memory.
Erases all settings saved using the Save Memory function.
Resets the cumulative lamp hours use time to 0 H. Reset when you replace the
lamp.
Explanation
Displays the cumulative lamp operating time.
Displays the source name for the connected equipment cur‐
rently being projected.
Displays the input signal.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projec‐
tion (Frame Packing, Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays Deep Color.
Displays the signal type of the video device connected to the
Video port.
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Displays the projector's serial number.
Displays the application error log.
Displays the firmware version of the projector.
Explanation
87
p.101
s
Advertisement
Table of Contents
