Table of Contents
Advertisement
Useful Functions
Using 3D Glasses
Use the supplied or optional 3D Glasses (ELPGS03) to view 3D images.
Depending on the model, 3D Glasses may not be supplied.
c
The 3D Glasses come with protective stickers. Remove the protective stickers before use.
Charging the 3D Glasses
The following charging methods are available, depending on the model of 3D Glasses being used.
If you have a WirelessHD Transmitter, you can use it to charge the glasses.
If you do not have a WirelessHD Transmitter, you can charge by using an optional USB Charging Adapter.
You can also charge by connecting the 3D Glasses to the USB port (TypeA) on the rear of the projector with
the USB cable (only when the projector is turned on).
Charging using the WirelessHD Transmitter
Use the USB cable to connect the 3D Glasses to
the WirelessHD Transmitter.
When a cable is connected to the HDMI5 port, the
WirelessHD Transmitter cannot charge 3D
glasses.
Charging using the USB Charging Adapter
Use the USB cable to connect the 3D Glasses to
the optional USB Charging Adapter, and then
Attention
•
Only connect to an electrical outlet that uses the voltage displayed on the 3D Glasses.
•
Note the following points when handling the supplied microUSB cable.
- You should not bend, twist, or pull the cable with too much force.
- You should not modify the cable.
- You should not perform wiring near an electric heater.
- You should not use the cable if it is damaged.
Pairing 3D Glasses
To create 3D images, the 3D Glasses need to be paired with the projector.
connect the USB Charging Adapter to an electrical
outlet.
c
The approximate charging and usage
times are as follows:
Charging
time
3 minutes
50 minutes
47
Usage time
Approx. 3 hours
Approx. 40 hours
Advertisement
Table of Contents
