Table of Contents
Advertisement
Configuration Menu
Function
IP Settings
(This can only be set
when Connection
Mode is set to Ad‐
vanced.)
SSID Display
IP Address Display
Security menu
Function
Security
Passphrase
Reset menu
Function
Reset network settings.
Menu/Settings
DHCP
IP Address
Subnet Mask
Gateway Address
On, Off
On, Off
Menu/Settings
Off, WPA2-PSK, WPA/
WPA2-PSK
-
Resets all adjustment values for Network to their default settings.
Explanation
Set whether or not (On/Off) to use DHCP. If specifying the
following address, set it to Off.
Enter the projector's IP address.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Enter the projector's subnet mask.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Enter the projector's gateway IP address.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Set whether or not (On/Off) to display the SSID onto the LAN
standby screen.
Set whether or not (On/Off) to display the IP address onto the
LAN standby screen.
Explanation
Set a security system.
In Quick, WPA2-PSK is selectable. In Advanced, WPA2-
PSK/WPA/WPA2-PSK is selectable.
Enter a passphrase.
The passphrase accepts 8 up to 32 single-byte alphanumeric
characters, and is case-sensitive.
In order to ensure security, it is recommended that you
change it periodically.
Explanation
86
Advertisement
Table of Contents
