Preparing
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
When using a computer cable
When using an HDMI cable
Connecting External Devices
Connecting to the Trigger Out port
To connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm) to the
Trigger Out port.
When set to on, a signal (12 V DC) is output from this port to communicate the projector's status (on or off)
to connected devices such as electric screens.
c
When using the Trigger Out port, set the Trigger Out function.
Out
p.79
Connecting to the Audio Out port
To connect external devices such as external speakers, connect a commercially available audio cable.
c
•
Do not connect headphones.
•
When the projector is in standby status, no audio can be output.
Settings - Operation - Trigger
s
19