Table of Contents
Advertisement
Troubleshooting
Indicator status during normal operation
Indicators
Standby condition
Warm-up in progress
(blue)
Cool-down in pro‐
gress
Projection in pro‐
gress
(blue)
c
•
Under normal operating conditions, the
•
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
Settings - Operation - Illumination
s
Status
When you press the
button on the control panel, projection starts after a short
wait.
Warm-up time is about 30 seconds.
The power-off operation is disabled while the projector is warm‐
ing-up.
All operations are disabled while the projector is cooling-down.
The projector enters standby condition when cool-down is com‐
plete. If for any reason the power cord is disconnected during
cool-down, wait until the lamp has cooled down sufficiently
(about 10 minutes), reconnect the power cord, and then press
the
control panel.
The projector is operating normally.
and
o
p.79
91
Remedy
button on the remote control, or the
button on the remote control, or the
indicators are off.
m
: Lit
: Flashing
: Off
button on the
Advertisement
Table of Contents
