Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 163

For pleasant driving
To listen to a CD
With a CD player
1. Insert disc with label facing up.
When a disc is inserted, the CD indicator
(16) will come on and the CD player will be-
gin playing even if the radio is being used.
The CD player will also start playback when
the CD button (8) is pressed with a disc in
the player even if the radio is being used.
NOTE
l If the system is equipped with a CD autoch-
anger, the system switches between the CD
player mode and the CD autochanger mode
each time the CD button (8) is pressed.
2. To adjust the volume and tone, refer to "To
adjust the volume" on page 5-15 and "To ad-
just the tone" on page 5-15.
NOTE
5
l
When an 8 cm compact disc is used, the adapt-
er is not needed for playback. Insert the disc
in the centre of the disc-loading slot.
l For information concerning the handling of
compact discs, refer to "Handling of compact
discs" on page 5-30.
To fast-forward/fast-reverse the disc
To fast-forward or fast-reverse the disc, press the
TRACK button (5).
Fast-forward
You can fast-forward the disc by pressing the
side of the TRACK button (5). While the button is
kept pressed, the disc will be fast-forwarded.
Fast-reverse
5-24
You can fast-reverse the disc by pressing the
side of the TRACK button (5). While the button is
E00709601004
kept pressed, the disc will be fast-reversed.
NOTE
l When you have fast-forwarded/fast-reversed
the disc, the playing-time may be shown
with deviation.
To listen to an MP3 CD
This CD player allows you to play MP3 (MPEG Au-
dio Layer- 3) files recorded on CD-ROMs, CD-Rs
(recordable CDs), and CD-RWs (rewritable CDs)
in ISO9660 Level 1/Level 2, Joliet, and Romeo for-
mats. Each disc may have a maximum of 16 trees,
100 folders, and 255 files per disc. During MP3
playback, the unit can display ID3 tag information.
For information concerning ID3 tag, refer to "CD
text and MP3 title display" on page 5-26.
1. Insert a disc containing MP3 files into the slot.
2. Press the CD button (8) for 2 seconds or lon-
ger to switch to MP3 CD mode from normal
music CD mode. The display shows "READ-
ING", then playback will begin. The folder
number and the track number will appear on
the display.
NOTE
l
While listening to a disc on which CD-DA
(CD-Digital Audio) and MP3 files have both
been recorded, you can switch between read-
ing of the CD-DA, reading of the MP3 files,
and AUX (auxiliary input) by pressing the
CD button for 2 seconds or longer (until you
hear a beep).
l With a disc that contains both CD-DA and
MP3 files, the CD-DA files are automatical-
ly played first.
l The playback sound quality differs depend-
ing on the encoding software and the bit rate.
For details, refer to the user manual of your
encoding software.
l Depending on file/folder configurations on a
disc, it may take some time before playback
starts.
l MP3 encoding software and writing software
are not supplied with this unit.
l You may encounter trouble in playing an
MP3 or displaying the information of MP3
files recorded with certain writing software
or CD recorders (CD-R/RW drivers).
l If you record too many folders or files other
than MP3 onto a disc, it may take some time
before playback starts.
l
This unit does not record MP3 files.
l For information concerning CD-Rs/RWs, re-
fer to "Notes on CD-Rs/RWs" on page 5-31.