Maintenance
Remove the bulb from the lamp holder.
NOTE
l
Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When installing the lens, align the 2 tabs on
the lens with the holes on the vehicle side.
8
8-32
Glove box lamp
E01006100388
1. Pull out the bulb.
2. To install the bulb, perform the removal
steps in reverse.
Vanity mirror lamps*
E01006200190
1. Insert a straight blade (or minus) screwdriver
into the notch of the lens and pry gently to re-
move it.
Remove the bulb from the lamp holder.
NOTE
l
Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.