Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 182

4. Move one of the sliders (A) towards the in-
side of the vehicle, and fit the protruding por-
tion (B) into the installation hole (C). Move
the opposite slider in the same fashion.
NOTE
l
After installing the position, gently shake the
entire tonneau cover to make sure it is secure-
ly retained.
To use
1. Draw out the cover retracted by spring and in-
sert it in the mounting grooves (D).
NOTE
l Do not place luggage on top of the tonneau
cover.
To remove
1. Remove the cover from the mounting
grooves, and the cover will roll back into the
retracted position.
For pleasant driving
2. Move one of the sliders (A) towards the in-
side of the vehicle and lift it to remove the
tonneau cover.
To store
1. Press the button (F) on the back of each slid-
er, and move the sliders inward.
2. Return the third seat to its original position.
(Refer to "Stowing the third seat" on page
2-13.)
5
5-43