Licence Plate Lamps - Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual

Maintenance
NOTE
l
When installing the lid, make sure the 2 tabs
(C) are aligned with the holes on the vehicle
side.

Licence plate lamps

1. Insert a straight blade (or minus) screwdriver
into the lamp assembly and pry gently to re-
move it.
8
8-30
NOTE
l Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens and the body.
2. Remove the socket by turning it anticlock-
wise, and then remove the bulb by pulling out.
E01004600813
3. To install the bulb, perform the removal
steps in reverse.
NOTE
l When installing the lamp, insert tab (A) first
then align and insert tab (B).
Room lamp & map lamps
E01004700481
1. Insert a straight blade (or minus) screwdriver
into the lens and pry gently to remove it.
Remove the bulb from the lamp holder.
NOTE
l Wrap a piece of cloth around the tip of the
screwdriver in order to avoid scratching the
lens.
2. To install the bulb, perform the removal
steps in reverse.