Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 63

Seat and seat belts
2. Open the gap a little between the seat cush-
ion (A) and the seatback (B) with your hand
to locate the lower anchorages (C).
2
3. Push the child restraint system's connectors
into the lower anchorages (C) in accordance
with the instructions provided by the child re-
straint system's manufacturer.
4. Remove the head restraint from the location
in which you wish to install a child restraint.
2-28
5. Latch the tether strap hook (D) of the child
seat to the tether anchorage (E) and tighten
the top tether strap hook so it is securely fas-
tened.
6. Push and pull the child restraint system in all
directions to be sure it is firmly secured.
To remove
Remove the child restraint in accordance with the
instructions provided by the child restraint sys-
tem's manufacturer.
Installing a child restraint system to a
3-point type seat belt (with emergency
locking mechanism)
E00408700545
Third seat Second seat Front passenger seat
Installation:
1. Fasten the seat belt to secure the child re-
straint system. Make sure you hear a "click"
when you insert the latch plate in the buckle.
2. Remove all slack by using the locking clip.
3. Push and pull the child restraint in all direc-
tions to be sure it is secure.
WARNING
l For some types of child restraint, the lock-
ing clip (A) should be used to help avoid
personal injury during a collision or sud-
den manoeuvre.
It must be fitted and used in accordance
with the child restraint manufacturer's in-
structions.
The locking clip must be removed when
the child restraint is removed.