Mitsubishi Electric GRANDIS OXPE10E1 Owner's Manual page 91

Instruments and controls
1. Press and hold down button (A), then press
the "SET" button (B) within 1 second, and a
buzzer will sound and the reset mode will be
changed.
3
2. The name of the newly selected mode will
flash, then the display will return to its origi-
nal indications.
3. The status of the selected mode will be
shown on the display.
3-14
or
1- Automatic reset mode
2- Manual reset mode
l
Automatic reset mode
When 4 hours have passed after the ignition
switch is turned to the "OFF" or "ACC" posi-
tion, the display is automatically reset. It
then shows "---".
l Manual reset mode
If you reset the display at the time when you
want to start the measurements, average fuel
consumption from that point of time can be
displayed.
Push the "DISP" button for more than 5 sec-
onds.
NOTE
l While the ignition switch is in the "ON" po-
sition, the automatic reset mode is permanent-
ly selected. If you wish to make continuous
measurements, select the manual mode.