15.
Navigate to Home > Server Settings > Add Cluster Node, and log in
as supervisor (default password: supervisor) to add the new node to
the cluster configuration.
16.
Confirm that you want to overwrite the node, review the settings, and
then click finish.
Wait for about 10 minutes for the node to reboot and join the cluster
successfully.
17.
Enter smu-uninstall to uninstall the embedded SMU.
Finalizing and verifying the server configuration
On the new server:
Procedure
1.
Navigate to Home > Status & Monitoring > System Monitor to verify
the server status:
• If the server is operating normally, and is not displaying any alarm
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
conditions, run a backup to capture the revised configuration, and
Server replacement procedures
113