Attaching A Rack Stabilizer Plate - Hitachi 3080 G2 Hardware Reference Manual

Attaching a rack stabilizer plate

A rack stabilizer plate and mounting hardware are supplied with some system
configurations. Hitachi Data Systems recommends that you always use the
stabilizer plate when provided. Use of a stabilizer plate is required for those
installations with dense trays.
The stabilizer contains two holes for securing it to the ground. Use suitable
screws to secure the stabilizer.
Note: Attach the stabilizer plate to the rack before loading the cabinet.
Procedure
1.
2.
3.
34
Place the stabilizer plate up against the bottom of the front side of the
cabinet.
Align the holes from the stabilizer plate to the holes on the bottom of the
cabinet.
Place the screws in the holes and secure them into the cabinet.
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
System overview