Item
9
10
11
12
13
Rear panel server LED and button locations
The rear panel of the server contains three (3) status LEDs that indicate
server status and two (2) buttons that are used to power up and reset the
server.
Item
1
2
3
4
5
Rear panel LED state descriptions
The NVRAM, power, and server status LEDs indicate whether the server is
powered, its operational state, and whether the NVRAM is currently being
protected by battery backup power. The way an LED flashes provides further
information about what is currently occurring.
48
Connectivity
I/O ports
RS-232
Video port
ETH0 1000baseT Ethernet
(gray logo)
ETH1 1000baseT Ethernet
(yellow logo)
Figure 5-9 Rear panel server LEDs and buttons
Meaning
NVRAM battery backup status LED
Power status symbol and LED
Server status LED
Reset button
Power button
Hitachi NAS Platform server components
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
Quantity
Description
2
USB port. (Reserved for Customer Service
Engineer access only.)
1
Management interface. (Reserved for
Customer Service Engineer access only.)
1
Video management interface port. (Reserved
for Customer Service Engineer access only.)
1
External system management. Connect to
the customer's management switch.
1
Management port. Connect to the rack's
internal Ethernet switch.