International Standards; Federal Communications Commission (Fcc) - Hitachi 3080 G2 Hardware Reference Manual

International standards

The equipment described in this manual complies with the requirements of
the following agencies and standards.
Safety
• Worldwide: IEC60950-1: 2nd edition
• EU: EN60950-1: 2nd edition
• North America: UL60950-1: 2nd edition; CAN/CSA-C22.2 No.60950-1-07
2nd edition
EMC
• USA: FCC Part 15 Subpart B class A
• Canada: ICES-003 Issue No 4 class A
• EU: EN55022 class A; EN61000-3-2; EN61000-3-3; EN55024
• Australia & New Zealand: C-Tick – AS/NZS CISPR22 class A
• South Korea: KCC class A
• Japan: VCCI class A
Certification for the following approvals marks have been granted:
• European Union CE mark, including RoHS2
• China: CCC
• Russia: GOST-R
• Taiwan: BSMI
• Argentina: IRAM
• Australia & New Zealand: C-Tick
• Mexico: NOM and CONUEE
• South Africa: SABS (safety) and EMC (self-certification by CoC)

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if it is not
installed and used in accordance with the instruction manual, might cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the users will be required to correct the
interference at their own expense.
Properly shielded and grounded cables and connectors must be used in order
to meet FCC emission limits. Neither the provider nor the manufacturer is
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide
Mandatory regulations 25