Finalizing And Verifying The System Configuration - Hitachi 3080 G2 Hardware Reference Manual

17.
18.
19.
20.

Finalizing and verifying the system configuration

On the new server:
Procedure
1.
2.
122
Navigate to Home > Server Settings > Configuration Backup &
Restore, locate the desired backup file, and then click restore.
Reconfigure the server to the previous settings:
• IP addresses for Ethernet ports 0 and 1
• Gateway
• Domain name
• Host name
The SMU should recognize the node as the same and allow it to be
managed.
Navigate to Home > Server Settings > License Keys to load the
license keys.
Repeat steps for any other replacement servers to be configured.
Navigate to Home > Status & Monitoring > System Monitor to verify
the server status:
• If the server is operating normally, and is not displaying any alarm
conditions, run a backup to capture the revised configuration, and
then download another diagnostic to support. Permanent license keys
for the new server will be provided within 15 days.
• If the server is not operating normally for any reason, contact support
for assistance.
Navigate to Home > Status & Monitoring > Event Logs, and then
click Clear Event Logs.
Server replacement procedures
Hitachi NAS Platform 3080/3090 G2 Hardware Reference Guide