Setting The Fan Speed Level (Fan Coil) Or The Operating Status - ABB -i-Bus-KNX Millenium Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
8.7

Setting the fan speed level (fan coil) or the operating status

To adjust the fan speed levels or the operating status, carry out the following steps:
1. Press the "Fan speed levels" button (1) several times until
the desired fan speed level or the desired operating
status is displayed.
2. Wait until the set time expires.
The adjustment is stored.
After the set time, or when the rotary control element is
actuated, the device changes back to the "Setpoint
adjustment".
If button "Fan speed levels" (1) is actuated, the currently set fan speed level or the corresponding operating status
appears in the display.
(A)
3
Automatic ventilation (display of fan speed level plus A)
0
Ventilation off/standby
1
Manual ventilation (display of fan speed level)
5
Note
The function of the stages is adjustable via parameters.
When "Fan coil" is not activated via parameters, this button is inactive.
KNX Technical Reference Manual | 1473-1-8681
1 2 3
1
6 5 4
Fig. 13: Device in fan speed level setting
Operation
— 26 —