Table of Contents
Advertisement
KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
Pos: 31.9.7 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Wartezeit für Anzeige der Ist-Temperatur @ 41\mod_1422466539975_15.docx @ 330651 @ 3 @ 1
11.4.6
General - Waiting period for display of actual temperature
Options:
After non-actuation of the device the current actual temperature again appears in the display
after the set waiting period.
Pos: 31.9.8 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Temperaturanzeige – Anzeige der Ist-Temperatur im Eco-Mode @ 41\mod_1422466667117_15.docx @ 330667 @ 3 @ 1
11.4.7
General - Display of actual temperature in eco mode
Options:
If the actual temperature is to be shown in ECO mode on the display, the parameter must be set
on active. The device will then primarily display the actual temperature. When actuating the
rotary control element the display changes to the setpoint adjustment. After non-actuation of the
device the current actual temperature again appears in the display after the set waiting period.
Pos: 31.9.9 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Helligkeitseinstellung – Tag-/Nachtbetrieb @ 41\mod_1422467762563_15.docx @ 330683 @ 3 @ 1
11.4.8
Brightness setting – Day/Night mode
Options:
Via the activated communication object "Day/Night" the backlighting of the display is shown
bright during day mode and darker during night mode.
Note
The operation only applies to the display. It does not apply to the backlighting of
the buttons.
Pos: 31.9.10 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Zusatz Millennium-RTR/Module/Helligkeitseinstellung – Helligkeit der Display-Hinterleuchtung @ 41\mod_1422467890937_15.docx @ 330699 @ 3 @ 1
11.4.9
Brightness setting – Brightness of display backlighting
Options:
This can be used to define the brightness of the display backlighting independent of day or night
mode.
Note
This parameter is only available if the "Day/Night mode" parameter is set on "No".
The operation only applies to the display. It does not apply to the backlighting of
the buttons.
KNX Technical Reference Manual | 1473-1-8681
Description of applications /
5 s
10 s
20 s
30 s
1 min.
2 min.
4 min.
No
Yes
No
Yes
Dark
Bright
objects
— 72 —
Advertisement
Table of Contents
