Table of Contents
Advertisement
KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
Pos: 31.11.30 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Status Fancoil Stufe @ 41\mod_1422461897948_15.docx @ 330070 @ 3 @ 1
11.5.22
Fan coil step status
Number
20
Using the "Fan coil step status" object, the room temperature controller receives the current fan
speed level of the fan coil actuator.
Pos: 31.11.31 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Lüfterstufe 1 @ 41\mod_1422461948945_15.docx @ 330086 @ 3 @ 1
11.5.23
Fan speed level 1
Number
21
This 1-bit communication object is used to output the active status (1) of the fan speed level,
while the other fan speed levels are deactivated (0), depending on the parameter setting. If the
fan speed level is inactive, the object has a value of (0).
Pos: 31.11.32 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Lüfterstufe 2 @ 41\mod_1422462014295_15.docx @ 330102 @ 3 @ 1
11.5.24
Fan speed level 2
Number
22
This 1-bit communication object is used to output the active status (1) of the fan speed level,
while the other fan speed levels are deactivated (0), depending on the parameter setting. If the
fan speed level is inactive, the object has a value of (0).
Pos: 31.11.33 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Lüfterstufe 3 @ 41\mod_1422462083123_15.docx @ 330118 @ 3 @ 1
11.5.25
Fan speed level 3
Number
23
This 1-bit communication object is used to output the active status (1) of the fan speed level,
while the other fan speed levels are deactivated (0), depending on the parameter setting. If the
fan speed level is inactive, the object has a value of (0).
Pos: 31.11.34 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Kommunikationsobjekte/Objekt-RTR / RTR/Module/Lüfterstufe 4 @ 41\mod_1422462149439_15.docx @ 330134 @ 3 @ 1
11.5.26
Fan speed level 4
Number
24
This 1-bit communication object is used to output the active status (1) of the fan speed level,
while the other fan speed levels are deactivated (0), depending on the parameter setting. If the
fan speed level is inactive, the object has a value of (0).
Pos: 31.11.35 /Systemmodule/++++++++++++++ Seitenumbruch +++++++++++++++ @ 41\mod_1422789416992_0.docx @ 333487 @ @ 1
KNX Technical Reference Manual | 1473-1-8681
Name
Fan coil step status
Name
Fan speed level 1
Name
Fan speed level 2
Name
Fan speed level 3
Name
Fan speed level 4
Description of applications /
Object function
Data type
Input / output
2-byte floating point
value
Object function
Data type
Output
Switching
Object function
Data type
Output
Switching
Object function
Data type
Output
Switching
Object function
Data type
Output
Switching
objects
— 82 —
Advertisement
Table of Contents
