Application "1-Button Step Switch - ABB -i-Bus-KNX Millenium Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
Pos: 31.21 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Applikations- / Objektbeschreibungen/KNX/KNX-Sensorik/Millenium/6125-26-29-IR - Bedienelement/Applikationen "Bedienelement mit Multifunktion"/Applikation "1-Tasten-Stufenschalter" @ 41\mod_1422540235397_15.docx @ 331498 @ 2 @ 1
11.7.6

Application "1-button step switch"

Different switching processes are triggered with each new actuation of the 1st or 2nd button.
For example:
• First actuation (2nd button) switches lamp 1 on.
• Second actuation (2nd button) switches lamp 1 off and lamp 2 on.
• Third actuation (2nd button) switches lamp 2 off and lamp 3 on.
• Fourth actuation (1st button) switches lamp 3 off and lamp 2 on.
• Fifth actuation (1st button) switches lamp 2 off and lamp 1 on.
• etc.
Up to five switching levels can be activated.
The application differentiates between whether the 1st or 2nd button was actuated. Depending on the setting, one
lower or one higher level can be switched to.
Parameters
General parameter
Number of objects
Evaluation period (s)
Additional Parameters
Working mode of the buttons
Sending of objects
Object values
Bit pattern of the object values
Objects
No. Object name
0 Switching stage 1
1 Switching stage 2
2 Switching stage 3
3 Switching stage 4
4 Switching stage 5
KNX Technical Reference Manual | 1473-1-8681
Settings
1 ... 5
1,0 ... 5,0
Settings
• 1st button Up, 2nd button Down
• 1st button down. 2nd button up
• for operation
• for change of value
• Normal
• inverse
• 1 of n
• x of n
Description of applications /
Comments
–
–
Comments
–
–
–
–
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
objects
Flags
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
— 95 —