Setpoint Settings - Reduction For Eco Heating (°C); Setpoint Settings - Set-Point Temperature For Frost Protection (°C); Setpoint Settings - Setpoint Temperature For Cooling Comfort (°C); Setpoint Settings - Increase For Standby Cooling (°C) - ABB -i-Bus-KNX Millenium Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
Pos: 31.7.91 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Absenkung Eco Heizen (°C) @ 40\mod_1421741763743_15.docx @ 313544 @ 3 @ 1
11.3.73 Setpoint settings - Reduction for ECO heating (°C)
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the eco icon.
Pos: 31.7.92 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Solltemperatur Frostschutz (°C) @ 40\mod_1421741866594_15.docx @ 313559 @ 3 @ 1
11.3.74 Setpoint settings - Set-point temperature for frost protection (°C)
Options:
Function for protecting the building against the cold. On devices with a display, this mode is
indicated by the frost protection icon. Manual operation is blocked.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
Pos: 31.7.93 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Solltemperatur Komfort Kühlen (°C) @ 40\mod_1421741954266_15.docx @ 313574 @ 3 @ 1
11.3.75 Setpoint settings - Setpoint temperature for cooling comfort (°C)
Options:
Specifies the comfort temperature for cooling when people are present.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling" or "Cooling with additional stage".
Pos: 31.7.94 /DinA-4 -- Online/Applikations- / Parameterbeschreibungen -- (KNX)/Applikation/Objekt-RTR/Module/Sollwerteinstellungen — Anhebung Standby Kühlen (°C) @ 40\mod_1421742032937_15.docx @ 313589 @ 3 @ 1
11.3.76 Setpoint settings - Increase for standby cooling (°C)
Options:
Specifies the temperature in cooling mode when nobody is present. On devices with a display,
this mode is indicated by the standby icon.
Note
This parameter is only available when the "Control function" parameter is set on
"Cooling", "Cooling with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
Pos: 31.7.95 /Systemmodule/++++++++++++++ Seitenumbruch +++++++++++++++ @ 41\mod_1422789416992_0.docx @ 333487 @ @ 1
KNX Technical Reference Manual | 1473-1-8681
Description of applications /
Setting option between 0 - 15
Setting option between 5 - 15
Setting option between 10 - 40
Setting option between 0 - 15
objects
— 56 —