Daily Use - Silvercrest SSR 576 A1 User Manual And Service Information

Table of Contents

Advertisement

Available languages

Available languages

Daily Use

Powering the Device On/Off
Power the satellite receiver on by pressing the On/Standby button (1) on the device or the
On/Standby button (23) on the remote control. Pressing the On/Standby button (1/22) again will
power the device back off. In this case the device switches to standby mode. If you cannot switch the
device on by using the On/Standby button (1/22), check the main power switch (22) on the back
panel and place it in the ON position.
Selecting Channels
Using the Channel Up/Down Buttons
Press the P+ (28) or P- (30) buttons on the remote control to skip to the previous or next channel.
Using the Numeric Buttons
Enter the desired channel number by using the numeric buttons (32).
Using the Channel List
Press the OK button (40) to open the channel list or an activated favourite list. Next you can
highlight the desired channel via the P+ (28) or P- (30) buttons. Press the OK button (40) to
switch to the highlighted channel. Press the – (29) or + (41) buttons to scroll by page through the
channel list downwards or upwards. Press the INFO button (31) to open a window with
information about the current programme. Press INFO (31) again to hide the information window.
To activate a different favourite list, in TV or RADIO, mode press the FAV button
[Yellow] (44). Next select the desired favourite list and press the OK button (40). If
you want to use the channel list, select <none> and then press the OK button (40).
Adjusting the Volume
Press the – (29) or + (41) buttons to adjust the volume of your digital receiver. Press the
(35) to mute or to restore the sound output
Teletext
Press the TEXT button (38) to launch the Teletext view. Pressing the TEXT button (38) multiple
times lets you change the Teletext window display mode. Press the SWAP button (37) to zoom the
upper half of the Teletext page. Press the SWAP button (37) a second time to enlarge the bottom
half of the teletext page and press it a third time to return to normal view.
Helpful Special Functions
Press the EPG [Green] button (34) to open the Electronic Programme Guide. Press the TV (24) or
RADIO button (36) to toggle between TV and radio channels. To toggle between the two last-tuned
stations, press the SWAP button (37).
INFO Button
The INFO button (31) lets you display information about the current programme. Press the – (29) or
+ (41) buttons to display information about the next programme. To close the dialog box, press the
INFO button (31) again or press EXIT (39).
Digital SD Sat Receiver SSR 576 A1
button
English - 29

Advertisement

Table of Contents
loading

Table of Contents