Door Mirror Removal and Installation
When removing or installing door mirror, refer to the
figure in "Door Mirror Components".
Power Door Mirror Switch Inspection
1) Remove driver side door trim referring to step 1) to
4) of "Front Door Glass Removal and Installation".
2) Remove power window main switch from door trim.
3) Check for continuity between terminals at each
switch position.
If check result is not as specified, replace door mirror
switch.
L
A
C
R
B
Up
Down
Left
Right
B
A
C
D
G
E
F
Power Door Mirror Actuator Inspection
1) Remove door trim referring to step 1) to 3) of "Front
Door Glass Removal and Installation".
2) Disconnect door mirror coupler (1).
3) Check that door mirror operates properly when
battery voltage is applied to connector terminals.
4) Connect battery positive (+) and negative (–)
terminal to the door mirror terminals as shown.
If it does not follow the table's operation, replace
door mirror assembly.
S7RW0A9506024
S7RW0A9506025
E
D
G
F
I5JB0A950039-01
S7RW0A9506026
Glass / Windows / Mirrors:
Terminal
Operation
Up
Down
Left
Right
C
B
Door Mirror Heater Inspection (If Equipped)
1) Remove door trim referring to step 1) to 3) of "Front
Door Glass Removal and Installation".
2) Disconnect door mirror connector (1).
3) Check for continuity between terminals "a" and "b".
If no continuity, replace outside mirror.
a
b
A
B
C
1
A
I7RW01950007-01
S7RW0A9506033
1
I7RW01950008-01
9E-27