Rear Speaker Removal and Installation (If
Equipped)
Removal
1) Remove rear door trim referring to Step 1) to 3) of
"Rear Door Glass Removal and Installation in
Section 9E".
2) Remove 3 rear speaker mounting screws (1).
3) Remove rear speaker (2) from rear door panel (3).
4) Disconnect rear speaker coupler from rear speaker
(2).
2
Installation
Reverse removal procedure.
GPS Antenna Removal and Installation (If
Equipped)
Removal
1) Remove combination meter cluster panel referring to
step 1) to 4) of "Combination Meter Removal and
Installation".
2) Disconnect GPS antenna connector from navigation
unit referring to "Audio Unit Removal and Installation
(If Equipped)".
3) Remove GPS antenna (1).
1
Installation
Reverse removal procedure.
S7RW0A9306019
1
3
I4RS0A930027-01
S7RW0A9306020
I5RW0A930022-01
Instrumentation / Driver Info. / Horn:
Horn Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
3) Disconnect horn connector (1).
4) Remove horn (2).
2
1
Installation
Reverse removal procedure for installation.
Horn Inspection
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
3) Disconnect horn connector (1).
4) Connect battery positive (+) to terminal of horn
connector (2) and negative (–) terminal to body
ground.
If horn is not sounding, replace horn.
9C-21
S7RW0A9306021
I7RW01930015-01
S7RW0A9306022
2
1
I7RW01930016-01