Toshiba VF-S15 Instruction Manual page 173

Note 1: The deceleration time and the acceleration time when f302=3 or 4 depend on the setting of f317
Note 2: Even if these functions are used, a motor may coast according to load conditions.
Note 3: Jog run function doesn't operate at synchronized acceleration/deceleration.
 An example of setting when f302=1
[When power is interrupted]
Input voltage
Internal DC
voltage level
Motor speed
Note 4: If power is interrupted during deceleration stop, power ride-through control will not be performed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
and that of f318, respectively.
In this case, use the auto-restart function (f301) for the smooth restart after power supply is restored .
About 100ms~10s
●The time for which the operation of the motor
can be continued depends on the machine
inertia and load conditions. Before using this
function, therefore, perform verification tests.
●Use with the retry function allows the motor to
be restarted automatically without being
brought to an abnormal stop.
Regenerative power
ride-through control selection
Coasting stop
F-61
E6581611
6