Toshiba VF-S15 Instruction Manual page 68

(1)
(2)
(3)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Operation Command : Panel Operation
Ex.2
Frequency Command: Setting Dial 2
Wiring
MCCB
Parameter setting
Title

Command mode selection

Frequency setting mode selection 1
Operation
RUN
Run/stop: Press the
Frequency setting: Turn the setting dial to set the frequency.
To save the frequency setting, press the center of the setting dial.
and the set frequency will flash on and off alternately, then set frequency will
be retained.
The set frequency will be retained even if power supply is cut.
*1: Single-phase models are R/L1 and S/L2/N.
PO
PA/+ PB
R/L1
S/L2
T/L3
*1
Operation panel
Function
STOP
and keys on the panel.
C-9
PC/-
Motor
U/T1
M
V/T2
W/T3
Setting value
1
3
E6581611
3