Shock Monitoring Function - Toshiba VF-S15 Instruction Manual

 How to set parameters
a) Operating method: Terminal input
b) Use the S2 and S3 terminals for switching. (Instead, other terminals may be used.)
Title
f115
f116
 Acceleration/ deceleration pattern
Acceleration/deceleration patterns can be selected individually, using the acceleration/deceleration 1, 2
and 3 parameters.
6
Title
f502
f503
f512
● For an explanation of acceleration/deceleration patterns, see 6.27.1.
● Both the settings of the S-pattern lower-limit and upper-limit adjustment parameters ( and
) are applied to any acceleration/deceleration S-pattern.

6. 28 Shock monitoring function

f590 : Shock monitoring
f591 : Shock monitoring trip/ alarm selection
f592 : Shock monitoring detection direction selection
f593 : Shock monitoring detection level
f595 : Shock monitoring detection time
f596 : Shock monitoring detection hysteresis
f597 : Shock monitoring detection start waiting time
f598 : Shock monitoring detection action selection
 Refer to "Shock monitoring function Instruction Manual: E6581875".
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Set the operation control mode selection cmod to 0.
S2: Acceleration/deceleration switching signal 1
S3: Acceleration/deceleration switching signal 2
Function
Input terminal selection 5 (S2)
Input terminal selection 6 (S3)
1) Linear acceleration/deceleration
2) S-pattern acceleration/deceleration 1
3) S-pattern acceleration/deceleration 2
Function
Acceleration/ deceleration 1 pattern
Acceleration/ deceleration 2 pattern
Acceleration/ deceleration 3 pattern
Adjustment range
0-203
0-203
Adjustment range
0: Linear
1: S-pattern 1
2: S-pattern 2
F-100
E6581611
Setting value
24 (the second
acceleration/deceleration
mode selection)
26 (the third
acceleration/deceleration
mode selection)
Setting value
0
0
0