Dhcp Client Setting - NEC SL 1000 Programming Manual

ISSUE 3.01
Program 10 : System Configuration Setup
Level:
IN
Description
Use 10-63 : DHCP Client Setting to set the data of DHCP Client.
Input Data
Item Item
No.
01 DHCP Client Mode
Conditions
None
Feature Cross Reference
None
Programming Manual

10-63 : DHCP Client Setting

Input Data
0 = Disabled If you are using IP phones/trunks it is rec-
1 = Enabled ommended to not use the DHCP client
function, a static IP address would be pre-
ferred. If you are going to still use the
DHCP client function then the DHCP serv-
er should be setup so that the same IP ad-
dress is always provided to the system.
Description
When changing this program a system
reset is required.
SL1000/SL1100
Program
10
Default
0
2-59