NEC SL 1000 Programming Manual page 28

Hide thumbs Also See for SL 1000:
Table of Contents

Advertisement

SL1000/SL1100
Item No.
02
Logical Port Number
03
Connection Type
04
Layer 3 Timer Type
Program
05
CLIP Information An-
nouncement
10
06
Connection Bus Mode
07
S-point DDI digits
08
Dial Sending Mode
09
Dial Information Element
14
Service Protocol for S-point 0 = Keypad facility
15
Call Busy Mode for S-point
17
ISDN Line Ringback Tone
18
Type of Number
19
Numbering Plan Identifica-
tion
24
Power feeding for S-point
25
Layer 1 Supervision (V3.0
Added)
25
Layer 1 Supervision (V3.0
Added)
2-6
Item
[0 : No setting] = 0
[1 : T-Point] = 96
[2 : S-Point] = 120
[3 ~ 5 : NW Mode] = 0
[6 : S-Point (Leased Line)] = 1 ~ 120
0 = Point-to-Multipoint
1 = Point-to-Point
1 ~ 5
0 = No
1 = Yes
0 = Extended passive bus
1 = Short passive bus
0 ~ 4
0 = Enblock Sending
1 = Overlap Sending
0 = Keypad Facility
1 = Called Party Number
1 = Specified Protocol for Aspire sys-
tem
0 = Alerting
1 = Disconnect
0 = Disable
1 = Enable
0 = Unknown
1 = International number
2 = National number
3 = Network specific number
4 = Subscriber number
5 = Abbreviated number
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0 = Disable
1 = Enable
0 = Disable
1 = Enable
0 = Disable
1 = Enable
Input Data
Based on this setting, the
system includes a Pre-
sentation Allowed (1) or
Presentation Restricted
(0) in the Setup message
to allow or deny the Call-
ing Party Number. Pro-
gram 15-01-04 must also
be set to 1 if this option is
enabled.
ISDN Protocol definition
ISDN Protocol definition
[Only when Dialing Send-
ing Mode (10-03-08) is
set for 1 (Overlap Send-
ing]
System can provide ring-
back tone, if set to 1 : En-
able.
ISDN Protocol definition
ISDN Protocol definition
Program 10 : System Configuration Setup
ISSUE 3.01
Description
Default
The starting port
0
number of a BRI line
is displayed. Two
logic ports are auto-
matically assigned to
a BRI line.
0
Each timer value of
1
Layer 3 is set up for
every type using Pro-
gram 81-06 (T-Bus).
1
0
0
1
1
0
0
0
0
0
0
1
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl 1100

Table of Contents