NEC SL 1000 Programming Manual page 301

ISSUE 3.01
Item
Item
No.
11 Incoming Ring Group
Transfer
Default
The default value of Programs 22-11-01 and 22-11-02 is shown as below.
Conversion Table
1
2
:
100
:
800
Conditions
When the trunk type is set to 3 (DID) in 22-02-01, the DID Transfer Destination for each DID feature is
not supported. This feature is supported only for DID trunks when assigned as VRS.
Feature Cross Reference
• Direct Inward Dialing (DID)
Programming Manual
Input Data
0 = Disable (Calls will Enable (1) or disable (0) each conversa-
not be routed to PRG tion tables ability to follow the Ring Group
22-12.) programming defined in Program
1 = Enable (Calls will be 22-12-01 : DID Intercept Ring Group. If
routed to PRG 22-12.) Program 22-11-05 (DID Translation Num-
ber Conversion, Transfer Destination
Number 1) and Program 22-11-06 (DID
Translation Number Conversion, Transfer
Destination Number 2) are set, the priority
of transferring is in this order (Program
22-11-05 then Program 22-11-06) then if
Program 22-11-11 is enabled, the calls will
overflow from Transfer Destination Num-
ber 2 to the destination programmed in
PRG 22-12-01.
Received number
00
01
:
99
:
No setting
Description
If the terminal is in Power Cutting mode
from the ecology feature this command
will not be applied.
Target number
No setting
SL1000/SL1100
Default
1
Program
22
200
201
:
299
:
2-279