Dtmf And Dial Tone Circuit Setup - NEC SL 1000 Programming Manual

ISSUE 3.01 SL1000/SL1100
Program 10 : System Configuration Setup

10-09 : DTMF and Dial Tone Circuit Setup

Level:
IN
Description
Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU for
Program
either DTMF receiving or dial tone detection. The CPU has 20 (SL1000) 16 (SL1100) circuits initially,
and an additional 16 circuits are added when a VMDB is installed. By Adding EXIFE system can have
10
up to 132 (SL1000) 96 (SL1100). These are used as follows:
• Extension: DTMF receiver for single line telephone
• Trunk: DTMF receiver for analog trunks, dial tone & busy tone detection for analog trunks
Input Data
Circuit/Resource Number 01 ~ 132 (SL1000)
01 ~ 96 (SL1100)
Programming Manual 2-15