E1 Trunk Basic Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Use Program 34-11 : E1 Trunk Basic Setup to define the basic setting of each E1 Trunk.
Program
34 Input Data
Item
No.
01 E1 Trunk Type
02 MFC Dialing Type
03 MFC Group B
04 Expected Number of
MFC Digits
2-368
Program 34 : Tie Line Setup
Trunk Port Number
Item Input Data
0 = Standard Trunk
1 = Argentine Pulsed
Clear Back Trunk
2 = Argentine Pulsed
Answer Trunk
3 = Brazil With seizure
acknowledge Trunk
4 = Brazil Without seiz-
ure acknowledge Trunk
5 = Brazil E&M Signal A
(Idle = 0) Trunk
6 = Brazil E&M Signal A
(Idle = 1) Trunk
7 = Brazil E&M Signal B
(Idle = 0) Trunk
8 = Brazil Code for col-
lect call blocking Trunk
0 = MFC Dialing not
used
1 = NEC Standard
2 = Argentina
3 = Brazil
4 = Chile
5 = Colombia
6 = Mexico
7 = Venezuela
0 = Disable
1 = Enable
0 ~ 20

34-11 : E1 Trunk Basic Setup

001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Description
Use this option to specify the E1 Signal
type (0 ~ 8). Set this option for compatibili-
ty with the connected Telco.
Use this option to specify the MFC Dialing
Type. The following table shows the avail-
able MFC Dialing Type choices, By de-
fault, this option is 0 (MFC Dialing not
used).
Use this option to enable (1) or disable (0)
the MFC Dialing Group B supervisory sig-
naling. Since not all central offices provide
Group B signaling, set this option for com-
patibility with the connected Telco. By de-
fault, this option is Disable (0).
Use this option to specify the number of
digits in the ANI number. This is required
for ANI since delimiters do not mark the
beginning and end of the data string. The
system must know how many digits of in-
coming ANI Caller ID data to interpret.
Program 34 : Tie Line Setup
ISSUE 3.01
Default
0
0
0
7