External Line Settings - Siemens HiPath 1100 Service Manual

Configuring the system specifically for the client
Table of the System's Programming Codes
6.2.2

External line settings

Programmed Code
Functions
Groups of external 156
lines
Seizure priority by 194
type of external
line
external analog line 017
seizure protocol
Caller ID for analog 005
lines (CLIP)
external Line Call 155
Direction
Flash Duration in 118
analog line
Reseizure time for 129
external line
Maximum time 117
between rings for
an incoming call
Coefficient for an 147
external Analog
Line
Type of Answering 158
**
Signal
Tone detector 160
external line 133
connection.
6-210
Intermediate data
group of external lines
external analog line
external analog line
External line
external analog line
external analog line
external analog line
external analog line
group of external lines
Data to be
programmed
External line
1 - Standalone
2 - Digital
3 - Analog
1 - Loop seizure
2 - Ground seizure
0 - Disabled
1 - DTMF1
2 - DTMF2 (off hook)
3 - FSK
1 - Bidirectional
2 - Incoming unidirectional
3 - Outgoing unidirectional
05 to 99
05 - 50 ms
99 - 990 ms
05 to 99
05 - 500ms
99 - 9900ms
05 to 20 seconds
1 - Standard line, 900 Ω
2 - 600 Ω line
3 - Short line
4 - Long line
0 - None
1 - Polarity Reversal
2 - DTMF Tone
∗
- Yes
# - No
1 - Direct
2 - Satellite PABX
Completing Default
data entry
# instead of 0
group
automatic 1 - Standal-
one
# instead of 2 - Canada
external line 1 - Other
countries
# instead of 1 - Brazil,
external line China, Peru,
India, IM-
Spain and IM-
English
2 - Russia
3 - Other
countries
# instead of 1 - Bidirec-
external line tional
*
# instead of Country
external line
Automatic 05
Automatic 13 seconds
for Argentina
4 seconds for
Korea
06 seconds
for the other
countries
# instead of 1 - Standard
external line line
# instead of 0 - None
external line
∗
# instead of - Yes
external line
# instead of 1 - Direct
external line
Service Manual