Siemens HiPath 1100 Service Manual page 242

Configuring the system specifically for the client
Comments about the system's programming codes
External call forwarding to a group member should not be used if "Call Deflection"
(Code 228) is activated for that member (it does not work for analog lines).
In this case, the system does not receive any information about the forwarded call
having been answered or not. Since the system does not have this information, it
continues to signal all other group members.
Alert ring timeout for Pickup Groups (035)
Incoming calls are signaled on standard telephone sets within a pickup group (Code 43) in telephones without a display they
are signaled by an alert ring signal. The duration of the ring tone can be specified.
Callback/Urgent Call activation by timeout (037)
When an extension or external number (on an ISDN digital line) is busy, this configuration allows you to set a timeout for acti-
vating the Recall or Urgent Call features after approximately 7 seconds.
Call name/number display (039)
This setting specifies the type of Caller ID information that will be shown on the telephone display.
UCD Subscriber Groups (023)
This setting creates a group of extensions that can receive internal and external calls.
A Subscriber Group is a group of extensions available for answering calls made to a specific number assigned to it.
An internal or external call directed to this group will be answered by the extension that has been free the longest.
In the event that all extensions in the group are busy external calls are routed to a hold queue.
Collect call barring for UCD Group (007)
When collect call barring is activated, all collect calls are automatically rejected by the system (for Brazil only). The system by-
passes collect call barring for members of a UCD Group, that is, call barring is only verified for the group.
If a call has been answered at least once by the system, collect call barring cancels
the blocking.
If the call is forwarded due to Call Forwarding - No Answer over a digital line (*14)
and collect call barring is activated, the call will ring at the first DID for the external
line.
Message Waiting for UCD Queue (024)
This feature lets you assign a message or Music on hold for a UCD group extension when all extensions in the group are busy
or unavailable.
UCD Queue Size (025)
This specifies the number of calls that can wait on a UCD Queue, for each UCD Group.
6-242
Service Manual