Siemens HiPath 1100 Service Manual page 76

Modules
Expansion modules (EB)
7-segment display readings (H801) (S2 access)
Display
0
Continuous
1
Continuous
E
Continuous
8
Continuous
Continuous
Continuous with
A
segment "g"
2 3
Continuous
or
7
Continuous
F
Continuous
3
Cycle - Live
f e
Alternating
h
Continuous
8.
Continuous
Continuous
Continuous
.
3-76
Reading
Wait connection with S2M Maintenance tool.
Starting TME1 module.
Waits 10 seconds for a command from the software (S2M
Maintenance).
Transferring memory contents to DRAM memory.
Checking and validating contents of Flash memory.
TME1 module active with both links established.
blinking
Loading software from Flash.
Writing software to Flash memory.
Checking transferred data.
Clearing Flash memory.
Flash memory cleared.
No software in Flash memory. Waiting for Tool to download
software
Power up reset.
Clearing Flash memory.
DIU-S2M starting.
DIU-S2M operating normally. If it stops blinking, indicates
blinking
that the module is no longer working.
blinking TME1 is synchronizing clock via external network.
Meaning
Service Manual