Siemens HiPath 1100 Service Manual page 215

Programmed Code
Functions
Auto-Answering 034
Mode
Pulses for call 041
charges on an
analog extension
Timer for outgoing 047
external calls
Activate/Deacti- 048
vate timer for
outgoing external
calls
Activate/Deacti- 239
vate timeout for
external calls
Timeout for exter- 240
nal calls
Day to begin time- 241
out
Answering timeout 082
for a Second Atten-
dant for calls
received over MSN
Modem extension 085
MSN and exten- 086
sion assignment
for external outgo-
ing calls
External-to-exter- 091
nal transfer
Transfer when 217
extension is busy
Elapsed timeout 218
for external-to-
external connec-
tion
Configuring a time- 219
out for an external-
to-external connec-
tion
Disconnect time- 183
out after an exter-
nal-to-external
transfer
Service Manual
Intermediate data
extension
Analog extension
extension
extension
extension
extension
Index: 001 to 140
Extension
extension
+
1 - Day
2 - Night
extension
Configuring the system specifically for the client
Table of the System's Programming Codes
Data to be
programmed
∗
- to enable
# - to disable
∗
- to enable
# - to disable
Call duration: 00000 to
17280 in 5-second cycles
∗
- to enable
# - to disable
∗
- to enable
# - to disable
Timeout for external calls
00000 to 64800 in 5-
second cycles
(01 a 31) or
* To deactivate
(01 to 20) in 5-second
cycles
Index: 001 to 140
∗
- To activate
# - To deactivate
∗
- To activate
# - To deactivate
∗
- To activate
# - To deactivate
0000 to 1440 (in 1-minute
increments)
(004 to 120) in 5-second
cycles
Completing Default
data entry
# instead of # - to disable
extension
# instead of # - to disable
extension
# instead of 36
extension
Automatic # - to disable
Automatic # - to disable
# instead of 00000
extension
Automatic * - deacti-
vated
Automatic 06 (30
seconds)
Automatic None
Automatic None
# instead of # - To deacti-
extension vate
∗
Automatic - To acti-
vate
Automatic # - To deacti-
vate
Automatic 1 hour
Automatic 60 (300
seconds)
6-215