Table 6-24 Cd Interface Assignment - Siemens HiPath 1100 Service Manual

Configuring the system specifically for the client
Comments about the system's programming codes
HiPath 1120
A3/B3 ⇒ C3/D3
A4/B4 ⇒ C4/D4
Table 6-24 CD Interface Assignment
Extension Coefficient (148)
This function couples the impedances of the system and the extension line to which it is connected.
Collect Call Barring by extension (193)
When this blocking is activated, the system automatically rejects all incoming collect calls over a digital line calls received over
an analog line are rejected only at the moment they are answered.
If a call has been answered at least once by the system, Collect Call Barring cancels
the blocking.
If the call is forwarded due to Call Forwarding - No Answer over a digital line (*14)
and collect call barring is activated, the call will ring at the first DID for the external
line.
Please ask your local carrier about enabling blocking on digital lines.
Type of Equipment Connected to an Extension (003)
This setting specifies the type of equipment that is connected to extension slot A/B or S
Normal (system telephone, ISDN or analog telephone)
●
Data (Fax/modem)
●
Answering machine
●
Music
●
External entrance telephone
●
Voice Mail
●
6-248
HiPath 1150
A3/B3 ⇒ C3/D3
A4/B4 ⇒ C4/D4
A5/B5 ⇒ C5/D5
A6/B6 ⇒ C6/D6
A7/B7 ⇒ C7/D7
A8/B8 ⇒ C8/D8
.
0
Service Manual